HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 443)

2. Mount the secondary volume to which the backup data will be restored.
Execute the drmmount command on backup server A to mount the secondary volume:
BKServer A > drmmount 0000000002 -mount_pt W:
KAVX0001-I The drmmount command will now start.
KAVX0233-I Made EXG001,B001 open.
KAVX0233-I Made EXG002,B001 open.
KAVX0234-I Rerecognizes the physical volume.
KAVX0235-I Rerecognized the physical volume.
KAVX0400-I Mounting will now start.
Mount point = W:
KAVX0401-I Mounting has finished.
Mount point = W:
KAVX0400-I Mounting will now start.
Mount point = X:
KAVX0401-I Mounting has finished.
Mount point = X:
KAVX0002-I The drmmount command will now end.
BKServer A >
3. Restore the backup data from the tape to the secondary volume.
Execute the drmmediarestore command on backup server A to restore the backup data on
tape to the secondary volume:
BKServer A > drmmediarestore 0000000002
KAVX0001-I The drmmediarestore command will now start.
KAVX0404-I Restoration will now start.
To see more details on restoration progress, use the monitoring method of
the backup management product.
Source = W:
Target = W:
KAVX0404-I Restoration will now start.
To see more details on restoration progress, use the monitoring method of
the backup management product.
Source = X:
Target = X:
KAVX0405-I Restoration has finished.
Source = W:
Target = W:
KAVX0405-I Restoration has finished.
Source = X:
Target = X:
KAVX0040-I The backup ID has been assigned as follows:
Backup ID = 0000000003
KAVX0002-I The drmmediarestore command will now end.
BKServer A >
This operation assigns a new backup ID ( 0000000003 ), and registers it in the backup catalog
(backup ID 0000000001 is deleted).
Application Agent CLI User Guide 443