HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 523)

KAVX0006-E An error that stopped processing occurred.
Cause = DRM-10106: An internal error occurred.
In such a case, if the following message is output to the detailed trace log, the dictionary map files
are invalid:
ISAM API error code = xxx (yyyyy)
The dictionary map files consist of key definition files ( .DEF ), primary key files ( .K01 ), secondary
key files ( .K nn, where nn is 02 - 99 ), and data files ( .DRF or .DAT ). Therefore, a dictionary map file
error can be one of the following error situations:
• Missing or incorrect key definition files
• Missing or incorrect key files
• Missing data files
• Incorrect data files
The utility commands for checking and recovering from dictionary map file errors are stored in the
Application-Agent-installation-destination
\DRM\bin\util directory. Use these utility commands in
the following procedures to check and recover from errors.
NOTE:
The following procedures assume that the dictionary map files are stored in the default path. Therefore,
you might need to change the dictionary map file location paths depending on your operation
environment. You might also need to back up all dictionary map files before performing error recovery
operations.
Verifying dictionary map files
To verify dictionary map files:
1. Use the
drmischk
command to verify all dictionary map files.
drmischk -l 3 Application-Agent-installation-directory \DRM\db\DRM*
Application Agent CLI User Guide 523