HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 440)

3. Back up the backup data on the secondary volumes to tape.
Execute the drmmediabackup command on backup server A to back up the backup data on
the secondary volume to tape:
BKServer A > drmmediabackup 0000000001
KAVX0001-I The drmmediabackup command will now start.
KAVX0402-I Backup processing will now start.
To see more details on backup progress, use the monitoring
method of
the backup management product.
Source = W:
KAVX0402-I Backup processing will now start.
To see more details on backup progress, use the monitoring
method of
the backup management product.
Source = X:
KAVX0403-I Backup processing has finished.
Source = W:
KAVX0403-I Backup processing has finished.
Source = X:
KAVX0040-I The backup ID has been assigned as follows:
Backup ID = 0000000002
KAVX0002-I The drmmediabackup command will now end.
BKServer A >
Execute the
drmmediabackup
command on backup server B to back up the backup data on
the secondary volume to tape:
BKServer B > drmmediabackup 0000000011
KAVX0001-I The drmmediabackup command will now start.
KAVX0402-I Backup processing will now start.
To see more details on backup progress, use the monitoring
method of
the backup management product.
Source = W:
KAVX0402-I Backup processing will now start.
To see more details on backup progress, use the monitoring
method of
the backup management product.
Source = X:
KAVX0403-I Backup processing has finished.
Source = W:
KAVX0403-I Backup processing has finished.
Source = X:
KAVX0040-I The backup ID has been assigned as follows:
Backup ID = 0000000012
KAVX0002-I The drmmediabackup command will now end.
BKServer B >
This operation assigns new backup IDs at the local site ( 0000000002 ) and the remote site
( 0000000012 ), and registers them in the backup catalogs.
Operation for Exchange databases 440