HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 140)

2. Register the following items according to the output messages:
Table 37 Parameters for the cluster software
Explanation Entry name
Enter the virtual server name to be managed by the cluster software. Virtual server name (required)
Enter the service group name. Resource group name (required)
Name of the instance or application
to be backed up (required)
• When the backup is of a file system:
Enter a hyphen (
- ).
• When the backup is of an SQL Server database:
Enter the SQL instance name.
• When the backup is of an Exchange database:
Enter the storage group name.
Enter D . Resource type (required)
Enter the disk resource name. You do not need to specify the
service resource.
Resource name (required)
• In a Veritas Storage Foundation environment:
Enter the cluster resource names of the mount-point (logical
volume)
#1
and the disk-group
#2
.
Enter the following information corresponding to the resource
name:
Disk name (required if you have
specified a resource type)
• If you specified the mount-point:
Enter the mount point (e.g.,
D: ).
• If you specified the disk-group:
Enter the disk group name (e.g.,
DG01 ).
#1: A resource whose resource type is MountV
#2: A resource whose resource type is VMDg
3. Confirm that the cluster information configuration definition file ( VCS.dat ) has been created.
The cluster information configuration definition file is created in the following location:
Application-Agent-installation-directory\DRM\conf\cluster\VCS.dat
4. Register the following items according to the output messages:
To check your registration, execute the
drmclusinit
command with the
-v
option specified,
on the database server or file server:
PROMPT> drmclusinit -v VCS
Preparation for using Application Agent 140