HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 497)

7. On backup server 1, verify that the backup to the tape device was completed successfully.
PROMPT> drmtapecat -backup_id 0000000002
BACKUP-ID BACKUP-OBJECT SNAPSHOT TIME EXPIRATION TIME BACKUP-MEDIA
0000000002 MSEXCHANGE 2010/01/01 12:00:00 2010/01/01 13:00:00 MEDIA1
PROMPT>
8. On backup server 1, unmount the secondary volume on which the backup data is stored.
Unmount the secondary volume with backup ID 0000000001 (set when the temporary file was
imported).
PROMPT> drmumount 0000000001
KAVX0001-I The drmumount command will now start.
KAVX0406-I Unmounting will now start.
Mount point = W:
KAVX0407-I Unmounting has finished.
Mount point = W:
KAVX0406-I Unmounting will now start.
Mount point = X:
KAVX0407-I Unmounting has finished.
Mount point = X:
KAVX0002-I The drmumount command will now end.
PROMPT>
Backing up passive mailbox database copies
The following is an operation example of backing up the passive mailbox database copy:
1. On backup server 2, start the Protection Manager service.
Application Agent CLI User Guide 497