HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 373)

7. Unmount the secondary volume.
To unmount the secondary volume, specify the backup ID that was used when mounting
0000000002 . This step must be performed on the backup server at the remote site.
PROMPT> drmumount 0000000002
KAVX0001-I The drmumount command will now start.
KAVX0406-I Unmounting will now start.
Mount point = E:
KAVX0407-I Unmounting has finished.
Mount point = E:
KAVX0002-I The drmumount command will now end.
PROMPT>
8. Check the execution results of the restoration from the tape to the secondary volume.
To confirm that the restoration finished successfully, execute the drmsqlcat command on the
backup server at the remote site.
PROMPT> drmsqlcat default -template
INSTANCE: default
BACKUP-ID: 0000000003 BACKUP-MODE: ONLINE INSTANCE: default ORIGINAL-ID: 0000000001
START-TIME: 04.02.04 13:01:35 END-TIME: 04.02.04 13:02:33 HOSTNAME: flora4
T DB OBJECT FILE FS DG DEVICE COPY-GROUP
M UserDB1 METAFILE O:\MSSQL\0000000002_0000000001.dmp - - - -
D UserDB1 DATAFILE O:\UserDB1_Data.MDF O: - Harddisk4
SI01,sql01
- - - - - - -
SI01,sql01
T UserDB1 TRANSACT O:\UserDB1_Log.LDF O: - Harddisk4
SI01,sql01
- - - - - - -
SI01,sql01
PROMPT>
9. Export the backup catalog to a temporary file.
To perform restoration from a secondary volume to a primary volume, you must copy the backup
catalog that contains information pertaining to the operations performed during the restoration
to the secondary volume. Copy this backup catalog to the database server on the remote site.
To export the backup information to the FTP root folder, execute the
drmdbexport command.
The following assumes that the FTP root folder is C:\FTP_ROOT , and that the backup information
is exported to C:\FTP_ROOT\EX-FILE1.drm .
PROMPT> drmdbexport 0000000003 -f C:\FTP_ROOT\EX-FILE1.drm
KAVX0001-I The drmdbexport command will now start.
KAVX0002-I The drmdbexport command will now end.
Application Agent CLI User Guide 373