HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 543
CLASS
can be replaced with
POLICY
for this example. However, both
POLICY
and
CLASS
cannot
be specified for the same
MOUNT_POINT
.
Example registering information for linkage to the tape backup management
software
•
The following shows an example registering information for linkage to the tape backup management
software.
To register information for linkage to the tape backup management software, execute the
drmtapeinit
command on the backup server, as follows:
PROMPT> drmtapeinit
PROMPT> KAVX0411-I Enter the backup management product name.
NBU
PROMPT> KAVX0417-I Enter the number of days to store the backup catalog.
10
Check that the configuration definition file for linkage with a tape backup management software has
been created.
•
Configuration definition file for linkage with a tape backup management software
(
C:\Program Files\CVXPAE\DRM\conf\tape\DEFAULT.dat
)
NBU
10
For details about registering information for linkage to the tape backup management software, see
“
Registering information for linkage with a tape backup management software
Example of the configuration definition file for tape backup
The following shows an example of the configuration definition file for tape backup.
The configuration definition file for tape backup is placed on the backup server. In this example, the
mount point for mounting the secondary volume from the backup server (
W:
,
X:
,
Y:
, and
Z:
) is
specified. Also,
default
is specified for the metafile directory, but this can also be an absolute path.
In this example,
C:\FTP_ROOT\script\OperationA\AP
is specified.
•
Configuration definition file, for tape backup
(
C:\Program Files\CVXPAE\DRM\conf\tape\NBU.dat
)
Application Agent CLI User Guide
543