HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 431)

2. Check that the temporary file has been imported correctly.
To check that backup information bearing the date on which the storage groups had been backed
up from the primary volume to the secondary volume has been imported into the backup server,
execute the
drmexgcat
command on the backup server.
BKServer > drmexgcat
STORAGEGROUP: STR1
BACKUP-ID:0000000001 BACKUP-MODE: VSS STORAGEGROUP: STR1 ORIGINAL-ID:0000000001
START-TIME:2007/08/05 10:00:00 END-TIME: 2007/08/05 10:01:00 HOSTNAME:DBServer
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1
TC01,EXG11
- - - - - - -
TC01,EXG11
T TRANSACT - E:\STR1\E00*.log E: - Harddisk2
TC02,EXG12
- - - - - - -
TC02,EXG12
C CHECKPOINT - E:\STR1\E00.chk E: - Harddisk2
TC02,EXG12
- - - - - - -
TC02,EXG12
BKServer >
3. Back up the data on the secondary volume onto tape.
To back up the data, execute EX_DRM_TAPE_BACKUP on the backup server. The command
specifies the D: drive as the mount point for tape backup.
BKServer > EX_DRM_TAPE_BACKUP Operation_A -mount_pt D:
In this example, when you execute the backup, information relating to this backup operation is
registered in the backup catalog with the new backup ID
0000000002 .
4. Check that the storage group has been backed to tape correctly.
To check that backup information bearing the date on which the storage group had been backed
up from the primary volume to the secondary volume is available, execute the
drmtapecat
command on the database server.
BKServer > drmtapecat 0000000002
BACKUP-ID BACKUP-OBJECT SNAPSHOT TIME EXPIRATION TIME BACKUP-MEDIA
0000000002 MSEXCHANGE 2007/08/05 10:00:00 2007/11/05 10:00:00 MEDIA1
BKServer >
Operations at the local site
• Resynchronize the copy groups.
To resynchronize the copy groups, execute EX_DRM_RESYNC on the database server.
DBServer > EX_DRM_RESYNC Operation_A
Restoring a storage group to a local site
This section explains how to restore a storage group to a local site when the local site is operating
normally without any failures. The procedures for restoring the data to a local site and to a remote
site are explained separately.
Application Agent CLI User Guide 431