HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 59
•
When VSS backup is used with SCC, backups can be performed only at the active server. However,
when VSS backup is used with CCR, backups can also be performed at the standby server.
•
Ability to reduce processing loads on the active server by performing backups on the standby
server.
In this manual, the function that performs seed processing automatically when restoring data is called
the automatic seed function. For details about seed processing, see the Exchange Server 2007 manual.
CCR can be configured for performing backups in any of the following four ways:
•
Configuration in which only the active server is used
•
Configuration in which only the standby server is used
•
Configuration in which different backup servers are used for the active and standby servers
•
Configuration in which the same backup server is used for the active and standby servers
Configuration in which only the active server is used
The following figure shows an example of a CCR configuration in which only the active server is used.
Figure 26 Example of a CCR configuration (only the active server is used)
Configuration in which only the standby server is used
The following figure shows an example of a CCR configuration in which only the standby server is
used.
Application Agent CLI User Guide
59