HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 435
Figure 126 Example of a system for backing up and restoring data in a cascade configuration
The examples in this section assume the following conditions:
•
The Protection Manager service is running on the backup server at the local site and the database
server and backup server at the remote site.
•
Backup of another primary volume cannot be performed until the secondary volumes are backed
up to the tape devices.
•
Initially, Exchange virtual server is running on database server A at the local site.
•
NetBackup is installed as the tape backup management software on the backup servers, and the
configuration definitions for the tape library devices have been defined.
•
The dictionary map files at both the local and remote sites are updated with the latest information.
•
The secondary volume of the local copy at both the local and remote sites is concealed.
•
The primary volumes are formatted as NTFS volumes.
•
Disks
P1
and
P3
are mounted as
D:
drives.
•
Disks
P2
and
P4
are mounted as
E:
drives.
•
An information storage configuration file for the active server storage group (
STR1
) is stored on
disk
P1
.
•
A transaction log file and a checkpoint file for the active server storage group (
STR1
) are stored
on disk
P2
.
Application Agent CLI User Guide
435