HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 488)

9. Import the transferred temporary file on the source server into the backup catalog.
A new backup ID is registered into the backup catalog.
An unused backup ID ( 0000000002 ) is assigned.
PROMPT> drmdbimport -f C:\0000000005.drm
KAVX0001-I The drmdbimport command will now start.
KAVX0418-I Backup information from the specified file was imported into the backup catalog.
Imported backup ID = 0000000002
KAVX0002-I The drmdbimport command will now end.
PROMPT>
10. From the source server, confirm that the file was successfully imported.
PROMPT> drmexgcat
STRAGEGROUP: STR1
BACKUP-ID:0000000002 BACKUP-MODE: VSS STRAGEGROUP: STR1 ORIGINAL-ID:0000000001
START-TIME:2007/11/01 10:00:00 END-TIME: 2007/11/01 10:05:00 HOSTNAME:EXG_SRV1
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1
EXG001,B001
- - - - - - -
EXG001,B001
P PUBLICSTORE PUBLIC1(STR1) D:\STR1\pub1.edb D: - Harddisk1
EXG001,B001
- - - - - - -
EXG001,B001
T TRANSACT - E:\STR1\E00*.log E: - Harddisk2
EXG002,B001
- - - - - - -
EXG002,B001
C CHECKPOINT - E:\STR1\E00.chk E: - Harddisk2
EXG002,B001
- - - - - - -
EXG002,B001
PROMPT>
11. Perform a point-in-time restoration on the backup data from the secondary volume to the primary
volume.
PROMPT> drmexgrestore 0000000002 -resync
KAVX0001-I The drmexgrestore command will now start.
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = Backupserver
KAVX1741-I The replication function of Exchange Server has stopped.
Target = Target
Storage group name = STR1
KAVX1805-I The information store will now be dismounted.
Storage group name = STR1
KAVX1700-I Restore processing will now start.
KAVX5111-I Performing unmounting.
Mount point name = D:
KAVX5111-I Performing unmounting.
Mount point name = E:
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG001,B001
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG002,B001
KAVX5109-I Dividing a copy group in pair.
Copy group name = EXG001,B001
KAVX5109-I Dividing a copy group in pair.
Copy group name = EXG002,B001
KAVX5110-I Performing mounting.
Mount point name = E:
KAVX5110-I Performing mounting.
Mount point name = D:
KAVX1701-I Restore processing has finished.
KAVX1806-I The information store will now be mounted.
Storage group name = STR1
KAVX0002-I The drmexgrestore command will now end.
Operation for Exchange databases 488