HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 465)

Restoring backup data acquired on the standby server (when the automatic seed function is
used)
This subsection gives an example of performing a roll-forward restore operation on a storage group,
using backup data that was acquired on the standby server.
1. Perform a failover operation so that the Exchange virtual server running on database server A
fails over to database server B.
2. Check the backup ID of the backup data.
To check the backup ID, execute the drmtapecat command on backup server B.
BKServer B > drmtapecat
BACKUP-ID BACKUP-OBJECT SNAPSHOT TIME EXPIRATION TIME BACKUP-MEDIA
0000000002 MSEXCHANGE 2002/06/01 11:00:00 2002/06/02 11:00:00 MEDIA1
BKServer B >
3. Mount the secondary volume to which the backup data will be restored.
Execute the drmmount command on backup server B to mount the secondary volume.
BKServer B > drmmount 0000000002 -mount_pt W:
KAVX0001-I The drmmount command will now start.
KAVX0400-I Mounting will now start.
Mount point = W:
KAVX0401-I Mounting has finished.
Mount point = W:
KAVX0400-I Mounting will now start.
Mount point = X:
KAVX0401-I Mounting has finished.
Mount point = X:
KAVX0002-I The drmmount command will now end.
BKServer B >
Application Agent CLI User Guide 465