HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 106)

than one volume. You need to take this into consideration when specifying the RAID Manager
configuration definition file. The following shows an example of coding in a configuration definition
file for a multi-target configuration and cascade configuration.
Figure 51 Configuration definition for a multi-target configuration and a cascade configuration
Setting up operation of Application Agent
Application Agent operation settings are specified in the Application Agent configuration definition
file (
init.conf ).
The init.conf file is stored in the following location:
Application-Agent-installation-folder \DRM\conf\init.conf
If the configuration definition file ( init.conf ) does not exist or contains an error, the commands
provided by Application Agent uses default values to complete processing. If you erroneously delete
the configuration definition file, you will need to reinstall Application Agent.
Specifying the retry count and interval for cluster resource status retry check
When a cold backup or a restoration is performed in a cluster environment, Application Agent switches
the cluster resources between online mode and offline mode. The retry operation checks whether the
cluster resource is placed online or offline. If you want to change the retry count and retry interval for
Preparation for using Application Agent 106