HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 136)

1. Change the locations of the dictionary map files and the backup catalog at both the local and
remote sites.
In the Application Agent configuration definition file ( init.com ), add
DRM_DB_PATH= any-directory-name ; Exchange-virtual-server-name. When editing the file, note
the following points:
• Add the entry to the last line of the init.conf file.
• Always enter a linefeed code following any-directory-name ; Exchange-virtual-server-name.
• Specify the same value for any-directory-name ; Exchange-virtual-server-name at both the local
and remote sites.
• Specify a disk other than the one that is to be backed up. Do not specify a disk configured
as part of a pair volume that is to be backed up.
• For the local and remote sites, specify a different disk for storing dictionary map files.
• Make sure that the disks that store dictionary map files are accessible regardless of whether
the virtual server is online or offline.
• Specify a directory name by using an absolute path.
The following line shows a specification example:
DRM_DB_PATH=H:\PTM;VHOST
2. Create dictionary map files and a catalog file at both the local and remote sites.
Execute the drmdbsetup utility as follows:
PROMPT> Application-Agent-installation-folder \DRM\bin\util\drmdbsetup -i
Once the dictionary map files and catalog files have been created, the following message is
displayed:
All data files were created.
Specifying cluster configuration settings and creating a
definition file
This section explains the settings required to set up the cluster configuration shown below, and how
to create a definition file.
The following items are explained:
• Settings related to shared disks and cluster groups
• How to create a cluster information configuration definition file (when Veritas Cluster Server is
used)
A cluster information configuration definition file needs to be created only when Veritas Cluster
Server is used as the cluster software. If the cluster software is Microsoft Cluster Service or Windows
Server Failover Clustering, you do not need to create a cluster information configuration definition
file.
Settings related to shared disks and cluster groups
If the file server or database server is set up in a cluster configuration, you must create the storage
directories used by Application Agent for dictionary map files and other files on a shared disk.
Preparation for using Application Agent 136