Deployment of operation definition files – HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 187
Creating operation definition files for file system backup
Create an operation definition file according to the configuration of the system using extended
commands. After creating the operation definition files, store them in the following directory of each
server where the extended commands will be executed:
Application-Agent-installation-directory
\DRM\script\conf\
After storing the operation definition file in the stipulated directory, execute the check tool for operation
definition files to check the content of the operation definition file and automatically create a temporary
directory for extended commands.
Deployment of operation definition files
Create two same operation definition files for each target mount point or file. Place one operation
definition file on the file server and the other on the backup server. In a cluster configuration, the same
operation definition file must be located on all the servers where the cluster resource (mount point or
file) to be backed up is defined.
The following figure shows the locations of operation definition files.
Figure 57 Example of deploying operation definition files (cluster configuration when the backup is
of a file system)
In this example, the virtual server
VServer_C
is running on the file server A (server name:
FSServer_A)
and the file server B (server name:
FSServer_B)
, which are making up the cluster.
The three mount points
D:
,
M:
, and
N:
exist on the file server A and file server B, and the virtual
server C (server name:
VServer_C
) has been defined as a cluster resource. The mount points
M:
and
N:
are assumed to be set in the mount point directory target definition file
app.txt
so that the
mount point directories are operated at one time.
In this example, on the file server A and the file server B, place the operation definition file about
D:
and the operation definition file about the mount point directories (
M:
and
N:
) specified in the
app.txt
. On the backup server (server name:
BKServer
), place the operation definition file about
D:
and the operation definition file about
M:
and
N:
.
Application Agent CLI User Guide
187