HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 425)

volume, the database can be recovered to the state it was in immediately before the error occurred
(state immediately before point C) by executing roll-forward.
System configuration
The system configuration described in this operation example is shown below.
This example describes the procedure for restoring only the data in the mailbox store (Information
Store) out of the backup data obtained by VSS from the secondary volume to the primary volume,
and rolling forward transaction logs. (If restoration is executed in units of Information Stores, you must
roll forward transaction logs at the time of restoration.)
Figure 124 System configuration for restoring data in units of Information Stores by applying transaction
logs
The prerequisites for this example are the same as for backup and restoration using VSS plus the
prerequisites that follow:
• Only the data files ( *.edb ) in the Information Store are stored on the same disk.
• The transaction log file on the primary volume is not destroyed (roll-forward is executable).
• Storage group SG1 has been backed up from the primary volume to the secondary volume using
VSS.
Application Agent CLI User Guide 425