HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 433)

5. Export the backup information to temporary files.
To restore from the secondary volume to the primary volume, you must copy to the database
server the information about the restore operation that was performed from the tape to the
secondary volume. Execute the
EX_DRM_DB_EXPORT
command to export the restore
operation-related information to a temporary file in a temporary directory for extended commands.
BKServer > EX_DRM_DB_EXPORT Operation_A
Operations at the local site
To restore a storage group to a local site:
1. Receive the temporary files on the database server in the local site.
To batch-receive the temporary files held on the backup server onto the database server, execute
EX_DRM_FTP_GET on the database server. The temporary files are stored in the temporary
directory for extended commands, on the database server.
DBServer > EX_DRM_FTP_GET Operation_A -server BKServer -user admin -password password
Note that in this procedure, the data can be transferred using the pair function of Continuous
Access Software or Continuous Access Journal, without using
EX_DRM_FTP_GET .
2. Import the temporary files, which were transmitted from the database server, into the backup
catalog on the database server.
To import the temporary files, which were transmitted from the database server, into the backup
catalog on the database server, execute
EX_DRM_DB_IMPORT .
DBServer >EX_DRM_DB_IMPORT Operation_A
3. Check that the temporary file has been imported correctly.
To check that backup information bearing the date on which the storage groups had been backed
up from the primary volume to the secondary volume has been imported into the database server,
execute the
drmexgcat command on the database server.
DBServer > drmexgcat
STORAGEGROUP: STR1
BACKUP-ID:0000000003 BACKUP-MODE: VSS STORAGEGROUP: STR1 ORIGINAL-ID:0000000001
START-TIME:2007/08/05 10:00:00 END-TIME: 2007/08/05 10:01:00 HOSTNAME:DBServer
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1
TC01,EXG11
- - - - - - -
TC01,EXG11
T TRANSACT - E:\STR1\E00*.log E: - Harddisk2
TC02,EXG12
- - - - - - -
TC02,EXG12
C CHECKPOINT - E:\STR1\E00.chk E: - Harddisk2
TC02,EXG12
- - - - - - -
TC02,EXG12
DBServer >
Application Agent CLI User Guide 433