HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 503)

11. On the backup server, perform a roll-forward restore operation for the data on the secondary
volume to the primary volume. Do this with the seed function enabled.
PROMPT> drmexgrestore 0000000002 -resync -recovery -ef exchange.conf
KAVX0001-I The drmexgrestore command will now start.
KAVX1526-I The Exchange environment configuration file has been read.
Exchange environment configuration file = exchange.conf
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = Backupserver1
KAVX1753-I The replication function of Exchange Server has stopped.
If the replication function does not resume automatically, manually resume the replication
function.
Exchange Server name = Databaseserver2
Information store name = Mail01
KAVX1808-I The information store will now be dismounted.
Information store name = Mail01
KAVX1700-I Restore processing will now start.
KAVX5111-I Performing unmounting.
Mount point name = D:
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG001,B001
KAVX5109-I Dividing a copy group in pair.
Copy group name = EXG001,B001
KAVX5110-I Performing mounting.
Mount point name = D:
KAVX1701-I Restore processing has finished.
KAVX1809-I The information store will now be mounted.
Information store name = Mail01
KAVX1757-I Seed processing will now start.
Exchange Server name = Databaseserver2
Information store name = Mail01
KAVX1758-I Seed processing has finished.
Exchange Server name = Databaseserver2
Information store name = Mail01
KAVX1755-I The replication function of Exchange Server has resumed.
Exchange Server name = Databaseserver2
Information store name = Mail01
KAVX0002-I The drmexgrestore command will now end.
PROMPT>
Restoring backup data of a passive mailbox database copy
The following is an operation example of restoring the backup data of the passive mailbox database
copy:
1. Change the state of the mailbox database copy to be restored to active.
Switch the active mailbox database copy so that the active mailbox database copy on database
server 1 will be active on database server 2.
2. On backup server 2, start the Protection Manager service.
3. On backup server 2, check the backup ID on the tape device.
PROMPT> drmtapecat
BACKUP-ID BACKUP-OBJECT SNAPSHOT TIME EXPIRATION TIME BACKUP-MEDIA
0000000002 MSEXCHANGE 2010/01/01 12:00:00 2010/01/01 13:00:00 MEDIA1
PROMPT>
Application Agent CLI User Guide 503