Allied Telesis AT-S63 - Manual (Page 101)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Features 101
ENABLE SNMP
Sy nt a x
enable snmp
Pa r a me t e r s
None.
De s c r i pt i on
This command activates SNMP on the switch so that you can remotely
manage the unit with an SNMP application program from a management
station on your network. It also enables the switch to send SNMP traps to
trap receivers. The default setting for SNMP on the switch is disabled.
Exa mpl e
The following command activates SNMP on the switch:
enable snmp