Allied Telesis AT-S63 - Manual (Page 40)

Chapter 2: Basic Command Line Commands
40 Section I: Basic Features
SET PROMPT
Syntax
set prompt=" prompt "
Parameter
prompt Specifies the command line prompt. The prompt can be
from one to 12 alphanumeric characters. Spaces and
special characters are allowed. The prompt must be
enclosed in quotes.
Description
This command changes the command prompt. Assigning each switch a
different command prompt can make it easier for you to identify the
different switches in your network when you manage them.
Note
If you define the system name before you set up a system prompt,
the switch uses the first 16 characters of the system name as the
prompt. See “SET SYSTEM” on page 56.
Example
The following command changes the command prompt to “Sales Switch”:
set prompt="Sales Switch"
Equivalent Command
set asyn prompt=” prompt ”
For information, see “SET ASYN” on page 52.