Allied Telesis AT-S63 - Manual (Page 520)

Chapter 29: GARP VLAN Registration Protocol Commands
520 Section VI: Virtual LANs
SHOW GARP GIP
Syntax
show garp=gvrp gip
Parameter
garp Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Series switches.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the GIP-connected
ring for the GARP application:
ˆ GARP Application
ˆ GIP contact
ˆ STP ID
Example
The following command displays the GIP-connected ring for all GARP
applications:
show garp=gvrp gip