Allied Telesis AT-S63 User Manual
Page 273
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section II: Advanced Operations
273
De s c r i pt i on
This command modifies an ACL. You can use the command to change the
description, action, classifiers, and ports of an ACL.
Exa mpl e s
This command changes the description of ACL ID 4:
set acl=4 description=”ARP flow”
This command changes the action of ACL ID 6 to permit and reassigns it
to ports 4 to 7:
set acl=6 action=permit portlist=4-7
This command changes the classifiers of ACL ID 41:
set acl=41 classifierlist=22,24,36
Advertising