Allied Telesis AT-S63 - Manual (Page 77)

77
Chapter 5
Simple Network Time Protocol (SNTP)
Commands
This chapter contains the following commands:
ˆ “ADD SNTPSERVER PEER|IPADDRESS” on page 78
ˆ “DELETE SNTPSERVER PEER|IPADDRESS” on page 79
ˆ “DISABLE SNTP” on page 80
ˆ “ENABLE SNTP” on page 81
ˆ “PURGE SNTP” on page 82
ˆ “SET DATE” on page 83
ˆ “SET SNTP” on page 84
ˆ “SET TIME” on page 85
ˆ “SHOW SNTP” on page 86
ˆ “SHOW TIME” on page 88
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on SNTP, refer to Chapter 3, “Basic
Switch Parameters” in the AT-S63 Management Software Menus
Interface User’s Guide.