Allied Telesis AT-S63 User Manual
Page 68
Chapter 3: Basic Switch Commands
68
Section I: Basic Operations
is 0.0.0.0.
System Up Time
The length of time since the switch was last reset or power cycled.
Application Software
The version number and build date of the AT-S63 management software.
Bootloader
The version number and build date of the AT-S63 bootloader.
System Name
The name of the switch.
Administrator
The name of the network administrator responsible for managing the
switch.
Location
The location of the switch, (for example, 4th Floor - rm 402B).
Note
To configure the name, administrator, and location parameters, refer
to “SET SYSTEM” on page 56.
Power Information
The status of the main power supply, the redundant power supply (if
present), and internal power consumption.
Temperature (Deg.C)
The ambient temperature as measured where the air enters the cooling
vents on the side of the unit.
Fan Information
The speed or operating status of the system fan(s).
Example
The following command displays the above information about the switch:
show system