Chapter 11, Lacp port trunking commands – Allied Telesis AT-S63 User Manual
Page 165
Advertising
165
Chapter 11
LACP Port Trunking Commands
This chapter contains the following commands:
“CREATE LACP AGGREGATOR” on page 167
“DELETE LACP PORT” on page 169
“DESTROY LACP AGGREGATOR” on page 170
“SET LACP AGGREGATOR” on page 173
“SET LACP SYSPRIORITY” on page 175
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on LACP port trunks,
refer to Chapter 8, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.
Advertising