Activate mstp – Allied Telesis AT-S63 User Manual
Page 464
Advertising
Chapter 27: Multiple Spanning Tree Protocol Commands
464
Section V: Spanning Tree Protocols
ACTIVATE MSTP
Syntax
activate mstp
Parameters
None.
Description
This command designates MSTP as the active spanning tree on the
switch. You cannot enable MSTP or configure its parameters until after
you have designated it as the active spanning tree with this command.
Only one spanning tree protocol can be active on the switch at a time.
Example
The following command designates MSTP as the active spanning tree:
activate mstp
Advertising