Chapter 6, Snmpv2 and snmpv2c commands, R 6: snmpv2 and snmpv2c commands – Allied Telesis AT-S63 User Manual
Page 89
Advertising
Section I: Basic Features
89
Chapter 6
SNMPv2 and SNMPv2c Commands
This chapter contains the following commands:
“ADD SNMP COMMUNITY” on page 90
“CREATE SNMP COMMUNITY” on page 92
“DELETE SNMP COMMUNITY” on page 95
“DESTROY SNMP COMMUNITY” on page 97
“DISABLE SNMP AUTHENTICATETRAP” on page 99
“DISABLE SNMP COMMUNITY” on page 100
“ENABLE SNMP AUTHENTICATETRAP” on page 102
“ENABLE SNMP COMMUNITY” on page 103
“SET SNMP COMMUNITY” on page 104
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on this feature, refer to Chapter 5,
“SNMPv1 and SNMPv2c” in the AT-S63 Management Software
Menus Interface User’s Guide.
Advertising