Allied Telesis AT-S63 - Manual (Page 632)

Chapter 34: 802.1x Port-based Network Access Control Commands
632 Section VIII: Port Security
SHOW PORTACCESS|PORTAUTH PORT
Syntax
show portaccess|portauth=8021x|macbased port= port
authenticator|supplicant [config] [status]
Parameters
portaccess or Specifies the authenticator method of the
portauth port. Options are:
8021x Displays information for an 802.1x
authenticator port.
macbased Displays information for a MAC address-
based authenticator port.
port Specifies the port whose port-based access control
settings you want to view. You can specify more than
one port at a time.
authenticator Indicates that the port is an authenticator.
supplicant Indicates that the port is a supplicant.
config Displays the port-based access control settings for
the port. Omitting this option and the STATUS option
displays information on both.
status Displays the status and role of the port. Omitting this
option and the CONFIG option displays information
on both.
Description
This command displays information about authenticator and supplicant
ports.
Figure 56 illustrates the information displayed by this command for an
authenticator port. For an explanation of the parameters, refer to “SET
PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR” on
page 618.