Enable telnet – Allied Telesis AT-S63 User Manual
Page 45
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations
45
ENABLE TELNET
Syntax
enable telnet
Parameters
None.
Description
This command activates the Telnet server on the switch. With the server
activated, you can remotely manage the switch using the Telnet
application protocol. To disable the server, refer to “DISABLE TELNET” on
page 44. The default setting for the Telnet server is enabled.
Example
The following command activates the Telnet server:
enable telnet
Advertising