Allied Telesis AT-S63 - Manual (Page 260)

Chapter 16: Classifier Commands
260 Section II: Advanced Operations
DESTROY CLASSIFIER
Sy nt a x
destroy classifier= idnumber
Pa r a me t e r s
classifier Specifies the ID number of the classifier to be deleted. The
number can be from 1 to 9999. You can delete more than
one classifier at a time. You can specify the classifiers
individually (e.g., 2,5,7) as a range (e.g., 11-14), or both
(e.g., 2,4-8,12).
De s c r i pt i on
This command deletes a classifier from the switch. To delete a classifier,
you need to know its ID number. To display the ID numbers of the
classifiers, refer to “SHOW CLASSIFIER” on page 265.
You cannot delete a classifier if it is assigned to an ACL or QoS policy.
You must remove the classifier from the ACL or policy before you can
delete it.
Exa mpl e
This command deletes classifiers 2 and 4:
destroy classifier=2,4