Allied Telesis AT-S63 - Manual (Page 274)

Chapter 17: Access Control List Commands
274 Section II: Advanced Operations
SHOW ACL
Sy nt a x
show acl[= id_number ]
Pa r a me t e r s
acl Specifies the ID number of the ACL you want to view.
You can specify more than one ACL at a time.
De s c r i pt i on
This command displays the ACLs on the switch. An example of the
information displayed by this command is shown in Figure 25.
Figure 25. SHOW ACL Command
The command displays the following information:
ˆ ACL ID - The ACL’s ID number.
ˆ Description - The description of the ACL.
ˆ Action - The action of the ACL. An active of Permit means that the
port(s) where the ACL is assigned accepts those packets that meet the
criteria of the classifiers. An action of Deny means that the port(s)
---------------------------------------------
ACL ID .............. 1
Description ......... IP
Action .............. Deny
Classifier List ..... 1
Port List ........... 2-3
Is Active ........... Yes
---------------------------------------------
ACL ID .............. 2
Description ......... Subnets 211, 214
Action .............. Permit
Classifier List ..... 2,3
Port List ........... 2
Is Active ........... Yes
---------------------------------------------
ACL ID .............. 3
Description ......... Subnet 211
Action .............. Permit
Classifier List ..... 3
Port List ...........
Is Active ........... No
---------------------------------------------