Set switch consoletimer – Allied Telesis AT-S63 User Manual
Page 55
AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations
55
SET SWITCH CONSOLETIMER
Syntax
set switch consoletimer=
value
Parameter
consoletimer
Specifies the console timer in minutes. The range is 1
to 60 minutes. The default is 10 minutes.
Description
This command sets the console timer, which is used by the management
software to end inactive management sessions. The AT-S63 software
automatically ends a management session if it does not detect any activity
from a local or remote management station for the length of time specified
by the console timer. This security feature can prevent unauthorized
individuals from using your management station should you step away
from your system while configuring a switch. To view the current console
timer setting, refer to “SHOW SWITCH” on page 64.
Example
The following command sets the console timer to 25 minutes:
set switch consoletimer=25