Chapter 10, Static port trunking commands – Allied Telesis AT-S63 User Manual
Page 155
Advertising
155
Chapter 10
Static Port Trunking Commands
This chapter contains the following commands:
“ADD SWITCH TRUNK” on page 156
“CREATE SWITCH TRUNK” on page 158
“DELETE SWITCH TRUNK” on page 160
“DESTROY SWITCH TRUNK” on page 161
“SET SWITCH TRUNK” on page 162
“SHOW SWITCH TRUNK” on page 163
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on static port trunking,
refer to Chapter 8, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.
Advertising