Allied Telesis AT-S63 - Manual (Page 431)

AT-S63 Management Software Command Line Interface User’s Guide
Section IV: SNMPv3 431
SHOW SNMPV3 VIEW
Syntax
show snmpv3 view= view [subtree=OID|text]
Parameter
view Specifies an SNMPv3 View Table entry.
subtree Specifies the view subtree view. Options are:
OID A numeric value in hexadecimal format.
text Text name of the view.
Description
This command displays the SNMPv3 View Table entries. You can display
one or all of the table entries.
Examples
The following command displays the SNMPv3 View Table entry called
“snmpv3manager95”:
show snmpv3 targetparams=snmpv3manager95
The following command displays all the SNMPv3 View Table entries:
show snmpv3 targetparams