Allied Telesis AT-S63 - Manual (Page 489)

489
Chapter 28
Port-based, Tagged, and Multiple Mode
VLAN Commands
This chapter contains the following commands:
ˆ “ADD VLAN” on page 490
ˆ “CREATE VLAN” on page 493
ˆ “DELETE VLAN” on page 497
ˆ “DESTROY VLAN” on page 500
ˆ “SET SWITCH INFILTERING” on page 501
ˆ “SET SWITCH VLANMODE” on page 502
ˆ “SET VLAN” on page 504
ˆ “SHOW VLAN” on page 505
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
For background information on tagged and port-based VLANs, and
ingress filtering, refer to Chapter 24, “Port-based and Tagged
VLANs” in the AT-S63 Management Software Menus Interface
User’s Guide. For background information on the multiple VLAN
modes, refer to Chapter 26, “Multiple VLAN Modes” in the AT-S63
Management Software Menus Interface User’s Guide.