Allied Telesis AT-S63 - Manual (Page 509)

509
Chapter 29
GARP VLAN Registration Protocol
Commands
This chapter contains the following commands:
ˆ “DISABLE GARP” on page 510
ˆ “ENABLE GARP” on page 511
ˆ “PURGE GARP” on page 512
ˆ “SET GARP PORT” on page 513
ˆ “SET GARP TIMER” on page 514
ˆ “SHOW GARP” on page 516
ˆ “SHOW GARP COUNTER” on page 517
ˆ “SHOW GARP DATABASE” on page 519
ˆ “SHOW GARP GIP” on page 520
ˆ “SHOW GARP MACHINE” on page 521
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on this feature, refer to Chapter 25,
“GARP VLAN Registration Protocol” in the AT-S63 Management
Software Menus Interface User’s Guide.