Allied Telesis AT-S63 - Manual (Page 361)

AT-S63 Management Software Command Line Interface User’s Guide
Section III: IGMP Snooping, MLD Snooping, and RRP Snooping 361
ENABLE MLDSNOOPING
Syntax
enable mldsnooping
Parameters
None.
Description
This command activates MLD snooping on the switch.
Example
The following command activates MLD snooping:
enable mldsnooping
Equivalent Command
set ipv6 mldsnooping snoopingstatus=enabled
For information, refer to “SET IPV6 MLDSNOOPING” on page 362.