Reset system – Allied Telesis AT-S63 User Manual
Page 48
Advertising
Chapter 3: Basic Switch Commands
48
Section I: Basic Operations
RESET SYSTEM
Syntax
reset system [name] [contact] [location]
Parameters
name
Deletes the switch’s name.
contact
Deletes the switch’s contact.
location
Deletes the switch’s location.
Description
This command delete’s the switch’s name, the name of the network
administrator responsible for managing the unit, and the location of the
unit. To set these parameters, refer to “SET SYSTEM” on page 56. To
view the current settings, refer to “SHOW SYSTEM” on page 67.
Examples
This command deletes all three parameter settings:
reset system
This command deletes just the name:
reset system name
Advertising