Allied Telesis AT-S63 - Manual (Page 227)

227
Chapter 15
Event Log and Syslog Server Commands
This chapter contains the following commands:
ˆ “ADD LOG OUTPUT” on page 228
ˆ “CREATE LOG OUTPUT” on page 230
ˆ “DESTROY LOG OUTPUT” on page 234
ˆ “DISABLE LOG” on page 235
ˆ “DISABLE LOG OUTPUT” on page 236
ˆ “ENABLE LOG” on page 237
ˆ “ENABLE LOG OUTPUT” on page 238
ˆ “PURGE LOG” on page 239
ˆ “SAVE LOG” on page 240
ˆ “SET LOG FULLACTION” on page 242
ˆ “SET LOG OUTPUT” on page 243
ˆ “SHOW LOG” on page 246
ˆ “SHOW LOG OUTPUT” on page 251
ˆ “SHOW LOG STATUS” on page 253
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on these features, refer to Chapter 12,
“Event Logs and Syslog Servers” in the AT-S63 Management
Software Menus Interface User’s Guide.