Delete ip arp – Allied Telesis AT-S63 User Manual
Page 576
Chapter 32: Internet Protocol Version 4 Packet Routing
576
Section VII: Internet Protocol Routing
DELETE IP ARP
Syntax
delete ip arp=
ipaddress
Parameters
arp
Specifies the IP address of the host to be deleted
from the ARP cache.
Description
This command deletes static ARP entries from the ARP cache. This
command can delete only one ARP entry at a time. To view the entries in
the cache, refer to “SHOW IP ARP” on page 590.
You cannot use this command to delete dynamic entries from the table.
Dynamic entries are removed according to the ARP timeout value.
This command is not available on the AT-9408LC/SP, AT-9424T/GB, and
AT-9424T/SP switches.
Example
This command deletes the static ARP entry for a host with the IP address
149.42.67.8:
delete ip arp=149.42.67.8