Allied Telesis AT-S63 - Manual (Page 400)

Chapter 24: SNMPv3 Commands
400 Section IV: SNMPv3
DESTROY SNMPv3 TARGETADDR
Syntax
destroy snmpv3 targetaddr= target
Parameter
targetaddr Specifies an SNMPv3 Target Address table entry.
Description
This command deletes an SNMPv3 Target Address Table entry. After you
delete an SNMPv3 Target Address Table entry, you cannot recover it.
Example
The following command deletes an SNMPv3 Address Table entry called
“snmpmanager.”
destroy snmpv3 targetaddr=snmpmanager