TelVue HyperCaster® - Manual (Page 11)

TelVue HyperCaster ® User Manual / v5.0 / October 2014
© 2014 TelVue Corporation 16000 Horizon Way, Suite 500, Mt. Laurel, NJ 08054
HyperCaster
® is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com
10
6. In the Settings tree, click on the Passive mode page.
7. Make sure the Fall back to active mode box is checked.
8. Click OK to save the settings and exit.
Setting FTP Mode to Active in Internet Explorer
1. Click on Tools → Internet Options to open the Internet Options window.
2. Click on the Advanced tab.
3. In the Browsing section, scroll down to Use Passive FTP (for firewall and DSL modem
compatibility) and click in the box to uncheck it.
4. Click OK to save the settings and exit.
Running FTP with FileZilla
Before using FTP to transfer files, make sure it is set to Active Mode.
1. Open FileZilla.
2. In the Host box, enter the IP address of your server.
3. Enter the username and password. (The defaults are both psguser.)