TelVue HyperCaster® - Manual (Page 89)

TelVue HyperCaster ® User Manual / v5.0 / October 2014
© 2014 TelVue Corporation 16000 Horizon Way, Suite 500, Mt. Laurel, NJ 08054
HyperCaster
® is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com
88
Set Samba Workgroup
Your server ships with an integrated Samba file sharing server for easy networked access to your
digital video files. Samba is a standard way to transfer files among the server and other computers on
the network. For example, you can use Samba to export a project from a Non-Linear Editor (NLE) to
the server.
To change the Samba workgroup, click on samba in the Server Management section.
Type the name of the new workgroup and click the Save and Apply button.
Turn Off or Reboot the Server
To turn off or reboot the server, click the Shutdown/Reboot option. The application displays the
Manage the Server or Services screen.
Read the warnings on the screen before shutting down or rebooting the server or restarting the server
application. Shutdown, reboot, and restart actions will interrupt work in progress, including any
programming you may currently be streaming to viewers. The interruption could be as brief as a few
seconds but could take several hours if the system performs a filesystem check upon startup. For
assistance or if you often need to reboot or restart your server, contact TelVue Support.
Shutdown
To shut down the server without restarting it, click Shutdown.
Reboot
To reboot the server, which will restart the server and the User Interface, click Reboot.