Channel setup – TelVue HyperCaster® User Manual
Page 66
TelVue HyperCaster
®
User Manual / v5.0 / October 2014
© 2014 TelVue Corporation 16000 Horizon Way, Suite 500, Mt. Laurel, NJ 08054
HyperCaster
®
is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com
65
Here is a typical Config screen for someone with user privileges.
Channel Setup
Channel Setup requires admin-level privileges. Use the options in this section to name and edit
output channels, configure streaming, transitions, or continuity over a network channel, set the video
format, or set the multicast TTL format.
To name output channels or configure streaming, transitions, or continuity over a network channel,
click on the channels option. The application displays the Channel Setup page with a list of all
channels on this system.
Attributes
Click on the channel name or edit icon to edit. The application displays the Edit Channel screen.
The following fields are editable. To cancel
any unsaved changes and return to the
Config page, click the Cancel button at the
bottom of the screen.
•
Name – Enter a short, descriptive
name for the channel.
•
Description – Enter a longer
description about the channel that
will distinguish it from the others at
your installation.
•
TV Guide Station ID – If your
installation submits schedules to TV
Guide in X-List format, enter your
station ID.
•
Switch Output – (For systems with
a switch) Select a switch output for
this channel from the drop-down list.
•
Switch Input – (For systems with a
switch) Select a switch input for this
channel from the drop-down list, if
applicable.