Code Blue TOOLVOX X3 - Manual (Page 15)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 15 of 132
ToolVox® X3
Administrator Guide
FXO Ports – FXO’s receive dial tone, and should be cross connected to Bell POTS phone lines or
to Phone lines from customer PBX. These Port numbers are used when you build trunks to transport
calls into and out of the ToolVox.
Click the Blue “Edit” button next to the FXO Ports. Note that your port numbering may be different
and the Group Number should be 2. Do not change Kewl Start and make sure the ports are set up
as follows.
Hit save then
Then Continue with reload.
If done making adjustments in DAHDi then If done making adjustments in DAHDi then press
the Restart DAHDI button.
Press OK