Code Blue TOOLVOX X3 - Manual (Page 75)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 75 of 132
ToolVox® X3
Administrator Guide
UPD - Recording Custom Messages
1. Some Code Blue models have the capability to store messages that are played in various
manners when the unit is activated. You may want to record these messages prior to config-
uring your units. ToolVox allows you to select the recording from the dropdown menu on the
model configuration page (Ill. 5A).
2. To record your message(s) from the SETUP tab, go to Internal Options & Configuration >
System Recordings.
3. The System Recordings page will initiate (Ill. 5B).
4. Follow the instructions on this page. You can either use your phone to record the
message(s) or upload them from your PC.
NOTE: Recordings uploaded from your PC must be PCM Encoded, 16 bits at 8 kHz.
Illustration 5A
Illustration 5B