Code Blue TOOLVOX X3 - Manual (Page 7)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 7 of 132
ToolVox® X3
Administrator Guide
NOTE: After changing the network settings, you MUST restart your network services using the
following command:
sudo /etc/init.d/network restart
If you already know the IP address of ToolVox you can simply browse to the IP address of ToolVox
you can simply browse to the IP address to directly access the system and begin setting up Code
Blue Phones. The below is another side of the server if you wanted to setup the network devices
and/or the Post Fix Mail Server settings.