Code Blue TOOLVOX X3 - Manual (Page 91)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 91 of 132
ToolVox® X3
Administrator Guide
Fill out the fields:
• Description – Description of this particular Toolvox Media Gateway. If you have multiple Tool-
vox Media Gateway units, enter something that will help you identify which is which.
• IP Address of server – The IP Address of the Toolvox Media Gateway is displayed in alerts,
and is used for call event transmission.
• Port that events will be sent to (port that Event Server will listen on) – Specify the port on
the computer running Milestone XProtect Event Server to which events should be sent to. If you
not sure what to enter, contact the Server Administrator and request an available port. You will
need a port that can be used in conjunction with the Event Server’s IP address you are using.
• IP Address that events will be broadcast to (IP addres of Event Server) – Enter the IP
address of the Milestone XProtect Event Server. If you are not sure what the IP address of the
Event Server is, contact the Server Administrator to request an IP address that can be used in
conjunction with the port entered in the Port field.
Press the OK button to save.
ToolVox units that you have configured show up in a list in a separate panel. In the following screen-
shot, you can see there are two ToolVox units configured: ToolVox #1 and ToolVox #2.
ED-10048-A
User Guide
Code Blue ● ● ● ● ●
ED-10048-A