Code Blue TOOLVOX X3 - Manual (Page 52)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-154-F page 52 of 132
ToolVox® X3
Administrator Guide
The above action takes place in order from top to button upon a Button 1 press. The above will
activate Aux Output 1 turning a strobe light on, then place a call. It will try calling the first phone
number for 60 seconds if no answer. The max call duration is set at 600 seconds. During dialing the
person at the CB phone will hear standard ring back. Upon the call being answered Normal 2-way
conversation will be set up. In Call commands (specified in the IP1500/2500/5000 Manual) will be
allowed to be in use. Upon hang-up Aux Output 1 will be disabled stopping the combo/beacon light
from strobing.
There are many options you can use in the Actions Script area. Actions Scripts are covered in more
detail in the IP1500/2500 or IP5000 Administrators Guides.
Diagnostic Settings
SNMP Traps – enabled by default to send traps for UPD monitoring of the IP5000 phone by ToolVox
SNMP Server – by default the ToolVox IP Address
SNMP Server Port – 62 default port
12-24 Volt A/C or D/C - timeout in seconds to notify before a power failure on the main line is re-
ported - only applies to IP5000 model.
12 Volt D/C Battery – imeout in seconds before a power failure on the battery line is reported - only
applies to IP5000 model.
PoE Failure Timeout – timeout in seconds before a PoE failure is reported.
Microphone Test – frequency to test the IP1500/2500/5000 Microphone
Microphone Test Hour – What Hour to test the microphone at. Only applies to Daily and Weekly.
Microphone Test Days – Which days of the week to test the microphone on. Only applies to
Weekly.
Microphone Test Max Beeps – Maximum number of beeps used for the microphone test.
Microphone Test Volume - Microphone setting for the microphone test