RLE Falcon EM - Manual (Page 107)

User Guide: Falcon FMS Remote Access
www.rletech.com 970 484-6510 93
CHAPTER 7: REMOTE ACCESS
7-1 REMOTE ACCESS CONFIGURATION
The FMS can be remotely accessed with any terminal emulation software package. To establish a proper
dial-out session, set the appropriate modem port as follows:
 33.6K baud
 NO parity
 8 bits
 1 stop bit
 (2400/N/8/1)
 No software or hardware flow control
Once the proper settings are made, dial the phone number assigned to the FMS. Once communication is
established, press Enter. A login prompt will appear on the screen. Type the login and press Enter; type
the password and press Enter. The session will begin.
Type a question mark (
? ) to view the System Menu. To terminate the session, execute the command in the
software package that disconnects the modem. The commands for accessing the system remotely are
identical to the ones described in section 6-3.1 Main Configuration Menu - SC, on page 90. There is,
however, a limited command set for remote access. The available commands are:
 Current Alarms ( CA )
 Kill All Alarms ( KA )
 Display Date/Time ( TI )
 ADC Input Values ( AD )
 Modem Stats ( MS )
 System Configuration ( SC )
Pages can be acknowledged by phone number during a remote access session by entering
aa followed by
the alarm acknowledgement code for that phone number.
NOTE:
The factory default settings are:
Username: falcon
Password: rletech